Welcome to the Future of Learning Project

Follow these quick steps to start using Bodyswaps on your demo headset:

🛠️ Setup Instructions

1. Power On the Headset

Put on your headset and press the power button to turn it on.
If you see a previous session still running, click "End Session". The device may reboot automatically to prepare for your new session.

2. Complete Device Onboarding

You’ll be guided through a short onboarding experience that shows you:

• How to use the controllers

• How to adjust the headset for comfort

Take your time—this ensures a smoother experience during your Bodyswaps sessions.

3. Connect to Wi-Fi

After onboarding, you’ll be prompted to start a session. Click the arrow icon to continue.

To set up Wi-Fi:

• Look down and click the time in the bottom left corner to open Quick Settings

• Tap Wi-Fi and connect to your network

⚠️ Before you connect:
Check out our Technical Requirements Guide for supported Wi-Fi settings and a list of whitelisted endpoints your network must allow to run Bodyswaps smoothly.

4. Launch Bodyswaps

Once you're connected to Wi-Fi, find and select the Bodyswaps app on the device to begin your immersive experience!

💡 Need Support?

We’re here to help!
📧 Email us at support@bodyswaps.co with any questions.